Cozy MK IV Serial #1675: Chapter 23 Engine Installation

Cozy MK IV Serial #1675

Blog for building an experimental aircraft Cozy Mk IV (Serial #1675).

Pages

Chapters (Blogger Labels)

Chapter 01 Description and Introduction
Chapter 02 Bill of Materials
Chapter 03 Education
Chapter 04 Fuselage Bulkheads
Chapter 05 Fuselage Sides
Chapter 06 Fuselage Assembly
Chapter 07 Fuselage Exterior
Chapter 08 Head Rest and Seat Belts
Chapter 09 Main Gear and Landing Brake
Chapter 10 Canard
Chapter 11 Elevators
Chapter 12 Canard Installation
Chapter 13 Nose - Nose Gear & Brakes
Chapter 14 Center Section Spar
Chapter 15 Firewall
Chapter 16 Control System
Chapter 17 Pitch and Roll Trim
Chapter 18 Canopy
Chapter 19 Wings/Ailerons/Attach
Chapter 20 Winglets & Rudders
Chapter 21 Strakes
Chapter 22 Electrical System
Chapter 23 Engine Installation
Chapter 24 Armrests Seats Fairings
Chapter 25 Finishing
Chapter 26 Upholstery

Showing posts with label Chapter 23 Engine Installation. Show all posts

Showing posts with label Chapter 23 Engine Installation. Show all posts

Friday, December 20, 2013

at December 20, 2013 No comments:

Email This BlogThis!Share to X Share to Facebook Share to Pinterest

Labels: Chapter 21 Strakes, Chapter 22 Electrical System, Chapter 23 Engine Installation, Chapter 24 Armrests Seats Fairings

Older Posts Home

Subscribe to: Posts (Atom)

Relevant links for supplies and other info

Cozy IV Specs
Cozy Builders - Google Groups
Unofficial Cozy Builders Site - updates to plans and much more information (maintained by Marc Zeitlan)
Cozy Builders Mailing List, POH and other info
Cozy Builders - Map
Official Cozy Aircraft Site (outdated site)
Canard Zone
Central States Association - Facebook
COBA Canard Owner and Builder Association
Builder Sites (maintained by Erland Moen)
Experimental Aircraft Association
Rutan Aircraft Flying Museam
Dennis Butler's Grand Champion
aerocomposites.aero - Gear legs and fiberglass parts
Aircraft Spruce Cozy IV Parts
http://www.wicksaircraft.com/index.html
3:23 Composites
SDS EI EFI
Cozy Girrrls
Skycraft Surplus
www.enginegearonline.com/
Infinity Aerospace
NIck's web site
https://www.stuarthose.com/
http://www.tostenmfg.com/
www.eurekacnc.com
Featherlite (http://aerocad.com) parts
http://aeroelectric.com/
www.long-ez.com/
Earl's Performance Fuel Systems
FAA Amateur Built Operating Limitations
FreeFlight Composites
ADS-B blocking
FAA - A&P / Experimental Builder Experience
EZ.ORG moved to ez.canardaircraft.com

Total Pageviews

Blog Archive

▼ 2025 (1)
- ▼ September (1)
  - Current status/parts

► 2023 (2)
- ► December (1)
- ► September (1)

► 2019 (13)
- ► February (13)

► 2015 (15)
- ► June (1)
- ► May (3)
- ► April (1)
- ► March (7)
- ► February (2)
- ► January (1)

► 2014 (13)
- ► December (5)
- ► November (3)
- ► October (5)

► 2013 (4)
- ► December (4)

Search This Blog

Popular Posts

Jump start on buildilng a Cozy Mk IV

I purchased Sean Sullivan's Cozy Mk IV project on September 19th 2014. He'd bought a flying plane and found he'd been spendin...
Oct. 7th 2014 update

Ordered Chapter 13 Nose Gear hardware from Aircraft Spruce today. Also submitted builder registration transfer for plans 1675. Submitted ...
Chapter 14 6/7/2015 spar ready for wings & fuselage

Building the wings will be next, then the holes get drilled in the hard points on the spar and wings with everything meticulously lined up....
(no title)

Found a lot of good info in this book. Our tax dollars at work! FAA handbook on composites
Chapter 13 Nose - Nose Gear & Brakes
5/18/2015 Chapter 14 Step 7 & 8

Hard points floxed on. Corners floxed and layups over hard points. Wing bolt access hole cut. Layup is done with peel ply on...
Chapter 3 - 10 x 16 practice lay up.

6 plys of 12 1/2" x 18" BID After curing, trimmed to 10" x 16". Weight should be between 10.5 and 12.5 oz...
5/11/2015 Chapter 14 Step 7

Had some delays....waiting on epoxy from AS and finally got it from Wicks. Also had a week of vacation, a friend bought a Comanche so hel...
Fiberglass cutting station Rev 1.0

Here's a better photo of the fiberglass cutting station I made last fall. All the wheels castor. The work surface closes up to pr...
Chapter 10 Canard

About Me

Mike Satchell

View my complete profile

Report Abuse

Search This Blog

Powered by Blogger.