Cozy MK IV Serial #1675

Blog for building an experimental aircraft Cozy Mk IV (Serial #1675).

Pages

Chapters (Blogger Labels)

  • Chapter 01 Description and Introduction
  • Chapter 02 Bill of Materials
  • Chapter 03 Education
  • Chapter 04 Fuselage Bulkheads
  • Chapter 05 Fuselage Sides
  • Chapter 06 Fuselage Assembly
  • Chapter 07 Fuselage Exterior
  • Chapter 08 Head Rest and Seat Belts
  • Chapter 09 Main Gear and Landing Brake
  • Chapter 10 Canard
  • Chapter 11 Elevators
  • Chapter 12 Canard Installation
  • Chapter 13 Nose - Nose Gear & Brakes
  • Chapter 14 Center Section Spar
  • Chapter 15 Firewall
  • Chapter 16 Control System
  • Chapter 17 Pitch and Roll Trim
  • Chapter 18 Canopy
  • Chapter 19 Wings/Ailerons/Attach
  • Chapter 20 Winglets & Rudders
  • Chapter 21 Strakes
  • Chapter 22 Electrical System
  • Chapter 23 Engine Installation
  • Chapter 24 Armrests Seats Fairings
  • Chapter 25 Finishing
  • Chapter 26 Upholstery
Showing posts with label Chapter 18 Canopy. Show all posts
Showing posts with label Chapter 18 Canopy. Show all posts

Friday, December 20, 2013

at December 20, 2013 No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Labels: Chapter 18 Canopy, Chapter 19 Wings/Ailerons/Attach, Chapter 20 Winglets & Rudders
Older Posts Home
Subscribe to: Posts (Atom)

Relevant links for supplies and other info

  • Cozy IV Specs
  • Cozy Builders - Google Groups
  • Unofficial Cozy Builders Site - updates to plans and much more information (maintained by Marc Zeitlan)
  • Cozy Builders Mailing List, POH and other info
  • Cozy Builders - Map
  • Official Cozy Aircraft Site (outdated site)
  • Canard Zone
  • Central States Association - Facebook
  • COBA Canard Owner and Builder Association
  • Builder Sites (maintained by Erland Moen)
  • Experimental Aircraft Association
  • Rutan Aircraft Flying Museam
  • Dennis Butler's Grand Champion
  • aerocomposites.aero - Gear legs and fiberglass parts
  • Aircraft Spruce Cozy IV Parts
  • http://www.wicksaircraft.com/index.html
  • 3:23 Composites
  • SDS EI EFI
  • Cozy Girrrls
  • Skycraft Surplus
  • www.enginegearonline.com/
  • Infinity Aerospace
  • NIck's web site
  • https://www.stuarthose.com/
  • http://www.tostenmfg.com/
  • www.eurekacnc.com
  • Featherlite (http://aerocad.com) parts
  • http://aeroelectric.com/
  • www.long-ez.com/
  • Earl's Performance Fuel Systems
  • FAA Amateur Built Operating Limitations
  • FreeFlight Composites
  • ADS-B blocking
  • FAA - A&P / Experimental Builder Experience
  • EZ.ORG moved to ez.canardaircraft.com

Total Pageviews

Blog Archive

  • ▼  2025 (1)
    • ▼  September (1)
      • Current status/parts
  • ►  2023 (2)
    • ►  December (1)
    • ►  September (1)
  • ►  2019 (13)
    • ►  February (13)
  • ►  2015 (15)
    • ►  June (1)
    • ►  May (3)
    • ►  April (1)
    • ►  March (7)
    • ►  February (2)
    • ►  January (1)
  • ►  2014 (13)
    • ►  December (5)
    • ►  November (3)
    • ►  October (5)
  • ►  2013 (4)
    • ►  December (4)

Search This Blog

Popular Posts

  • Jump start on buildilng a Cozy Mk IV
    I purchased Sean Sullivan's Cozy Mk IV project on September 19th 2014.    He'd bought a flying plane and found he'd been spendin...
  • Oct. 7th 2014 update
    Ordered Chapter 13 Nose Gear hardware from Aircraft Spruce today.   Also submitted builder registration transfer for plans 1675.  Submitted ...
  • Chapter 14 6/7/2015 spar ready for wings & fuselage
    Building the wings will be next, then the holes get drilled in the hard points on the spar and wings with everything meticulously lined up....
  • (no title)
    Found a lot of good info in this book.   Our tax dollars at work! FAA handbook on composites
  • Chapter 13 Nose - Nose Gear & Brakes
  • 5/18/2015 Chapter 14 Step 7 & 8
    Hard points floxed on. Corners floxed and layups over hard points. Wing bolt access hole cut.    Layup is done with peel ply on...
  • Chapter 3 - 10 x 16 practice lay up.
    6 plys of 12 1/2" x 18" BID After curing, trimmed to 10" x 16".   Weight should be between 10.5 and 12.5 oz...
  • 5/11/2015 Chapter 14 Step 7
    Had some delays....waiting on epoxy from AS and finally got it from Wicks.   Also had a week of vacation, a friend bought a Comanche so hel...
  • Fiberglass cutting station Rev 1.0
    Here's a better photo of the fiberglass cutting station I made last fall.   All the wheels castor.   The work surface closes up to pr...
  • Chapter 10 Canard

About Me

Mike Satchell
View my complete profile

Report Abuse

Search This Blog

Powered by Blogger.